Specifications When Handling Oxygen Sensors

NOTIFICATION 

Incorrect handling of oxygen sensors 

• Damage to oxygen sensors 
• Different exhaust emission behaviour 
  • → Do not remove the plastic cap on the thread until just prior to fitting.
  • → Protect oxygen sensors from impact of any kind.
  • → Do not kink or twist the cables when screwing in the sensors.
  • → Do not re-use dirty or damaged components.

NOTIFICATION 

Incorrect line routing 

• Risk of damage to lines and hoses 
• Malfunction and fault memory entry on control unit 
  • → Avoid small bending radii when routing lines.
  • → File down edges and burrs in the routing area or mask them with adhesive tape.
  • → Maintain a sufficient distance from components exposed to high temperatures while driving.