LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (13 Engine - Crank Drive, Pistons 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 138219 - Removing And Installing TENSIONING Roller >> Installing TENSIONING Roller

Installing TENSIONING Roller

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screw for tensioning roller > Tightening torque 45 Nm (33 ftlb.)  .

scientia non olet · About LEMON Manuals