LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (13 Engine - Crank Drive, Pistons 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 137719 - Removing And Installing Deflection Roller >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove rear wall cover.

    > WM, 555919 REMOVING AND INSTALLING REAR WALL FLAP

  2. Loosen drive belt and remove it from the deflection roller.

    > 137819 REMOVING AND INSTALLING DRIVE BELT 

scientia non olet · About LEMON Manuals