Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Engine support to engine | Screw, M6 x 40 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Engine support to engine | Screw, M8 x 75 | Tightening torque | 33 Nm (24 ftlb.) | ||
| Vibration damper to crankshaft: Step 1 | External Torx screw, M8 x 1 x 25 (12.9) - replace screws | Initial tightening | 3 Nm (2 ftlb.) | ||
| Vibration damper to crankshaft: Step 2 | External Torx screw, M8 x 1 x 25 (12.9) - replace screw | Initial tightening | 8 Nm (6 ftlb.) | ||
| Vibration damper to crankshaft: Step 3 | External Torx screw, M8 x 1 x 25 (12.9) - replace screws - set threshold torque of 10 Nm (7.5 ftlb.) | Torque angle | 90° | +/- 5° | |
| Crash reinforcement to body | Tightening torque | 23 Nm (17 ftlb.) |