Removing Evaporator/Condenser Line

Information 

Seal open lines and hoses with suitable plugs from the > VAS 6122 - engine sealing plug set  .

1. Remove refrigerant line at the condenser.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pulling evaporator/condenser line out of condenser

   1. 1.1 Unscrew screw -1-  on the condenser.
   2. 1.2 Pull refrigerant line out of the condenser.
2. Loosen holder -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Loosen holder

3. Release electric plug connection -1-a-  and disconnect it -B-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Release electric plug connection and disconnect it

4. Remove refrigerant line for condenser -4-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unscrewing screw at connection point for refrigerant line for condenser

   1. 4.1 Unscrew screw -3-  at connection point for refrigerant line (internal heat exchanger) to the condenser.
   2. 4.2 Remove refrigerant line for condenser -4-  .
5. Unscrew screw -5-  at connection point for refrigerant line (internal heat exchanger) to the air-conditioning compressor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unscrewing screw at connection point for refrigerant line for compressor

6. Unscrew screws -7-  for refrigerant line from evaporator to condenser (internal heat exchanger) -8-  at the expansion valve.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unscrewing screws on expansion valve

7. Pull grommet -6-  out of the cross panel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pulling out grommet

8. Remove refrigerant line for evaporator.