Removing Brake Booster Vacuum Pump
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Hot components
- Risk of burns
→ Let hot components cool down.
→ Wear personal protective gear.
- Loosen pressure converter -2-
from the holder -3- and set it aside with lines connected.
Disconnecting pressure converter
- Unscrew screws -4-
and move holder -5-
with vacuum lines aside.
Loosening holder
- Disconnect plug connection -6-
and move brake booster line -7-
aside.
Moving brake booster line aside
- Disconnect vacuum hose -8- from brake booster vacuum pump.
Disconnecting vacuum hose
Information
Place a suitable cloth underneath to catch escaping oil when pulling off the vacuum pump.
- Unscrew screws -9- and remove brake booster vacuum pump -1-
.
Removing brake booster vacuum pump