LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 87 (20 Fuel Supply, Actuator 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 202319 Removing And Installing Tank Vent Valve (V8 BITURBO) >> Installing Tank Vent

Installing Tank Vent

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.

    Fastening nuts for cable duct for engine wire harness (cylinders 5-8) > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.)  .

    Fastening screw for tank ventilation sensor (USA) or dummy (cylinders 5-8) > Tightening torque 9 Nm (6.5 ftlb.)  .

    Fastening screws for engine wire harness holder > Item 4: Internal hexagon round-head bolt 8 Nm (5.8 ftlb.)  .

    Fastening screw for tank ventilation sensor (USA) or dummy (cylinders 1-4) > Tightening torque 9 Nm (6.5 ftlb.)  .

    Fastening nuts for cable duct for engine wire harness (cylinders 1-4) > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.)  .

scientia non olet · About LEMON Manuals