LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 85 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Left Cylinder Bank) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 5)

Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 5)

WARNING: This page is about a different variant/trim than selected.

Only for intake side of cylinder 5: 

  1. Lift up moulded part -3-  .
    1. 1.1 Push wiring harness -1-  aside.
    2. 1.2 Release and disconnect electric push-on connector -2-  .
    3. 1.3 Lift up moulded part -3-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824562Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Intake side of cylinder 5

  2. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
    G15824563Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Solenoid hydraulic valve for valve lift adjustment

    Only for outlet side of cylinder 5: 

  3. Lift up moulded part -2-  .
    1. 3.1 Release and disconnect electric push-on connector -1-  .
    2. 3.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824564Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Outlet side of cylinder 5

  4. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
    G15824565Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Solenoid hydraulic valve for valve lift adjustment