LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (4X Chassis - General (2.9L Turbo Gas -- 971 - PANAMERA (971))) >> WM, 4X00IN Safety Instructions And Information For Carrying Out Repairs On The Chassis >> General Warning Notes >> Working On Vehicles With PSM

Working On Vehicles With PSM

WARNING: This page is about a different variant/trim than selected.
WARNING: Steering-angle sensor not calibrated or calibrated incorrectly
  • Unexpected vehicle handling
  • Steering-angle sensor does not function
  • Malfunction in steering-angle sensor

    → After working on wheel suspension parts, when replacing the steering-angle sensor, and after changing the wheel alignment values, calibrate the steering-angle sensor using the PIWIS Tester.

    → Keep the front wheels in straight-ahead position on the measuring platform during calibration.

    → For vehicles with electromechanical steering, also re-teach the electric steering lock settings.

scientia non olet · About LEMON Manuals