LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (15 Engine - Cylinder Head, Valve Drive 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V6 Turbo) >> Installing Solenoid Hydraulic Valve For Valve Lift Adjustment

Installing Solenoid Hydraulic Valve For Valve Lift Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace O-ring on solenoid hydraulic valve for valve lift adjustment.
    2. 1.2 Tighten screws for solenoid hydraulic valve for valve lift adjustment to > Initial tightening 3 Nm (2 ftlb.)  and > Torque angle + 90°  .
scientia non olet · About LEMON Manuals