Subsequent Work

Only for installing upper chain housing cover on right cylinder bank: 

1. Fit additional coolant pump holder.
   1. 1.1 Position additional coolant pump holder -1-  , fit double screw securing holder to chain housing cover -3-  and tighten to > Tightening torque 9 Nm (6.6 ftlb.)  .
   2. 1.2 Fit screws securing additional coolant pump to holder -2-  and tighten to > Tightening torque 1.5 Nm (1.1 ftlb.)  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Additional coolant pump (right cylinder bank)

2. Install engine.

   > Removing and installing engine