Removing Rear-View Mirror
WARNING: This page is about a different variant/trim than selected.
Installation position of rear-view mirror
- Release the plug connection -a-
and pull it off -A-
.
Releasing plug connection
Information
The adhesive pad cannot be pulled off without damaging it and must always be replaced.
- Pull off adhesive pad -1-
.
Adhesive pad
- Unscrew fastening screw -1-
.
Fastening screw
- Remove rear-view mirror.
Removing rear-view mirror
- 4.1 Tie cord to the plug connection.
- 4.2 Pull up rear-view mirror. -arrow-
- 4.3 Pull wire harness out of the door.
- 4.4 Detach the cord (remains in the door).