Subsequent Work

Information 

Before and after fitting the trim cover for the distance measuring sensor control unit, check the following points:

• The holder for the distance measuring sensor control unit must not show any signs of deformation, which may have been caused, for example, by removing or installing the trim cover for the distance measuring sensor control unit. If the holder for the distance measuring sensor control unit is deformed, carefully push it back into shape. 
• If the trim cover is damaged or cracked, replace the trim cover. 
• After fitting the trim cover, check that it is seated correctly and securely. 

1. Fit covers for distance measuring sensors.
2. Perform a test drive. Check that the distance measuring sensor is working.