Removing Battery
Information
Switch off all loads and remove the ignition key.
- Do not disconnect the battery while the engine is running.
- Disconnect and re-connect battery with extreme caution.
- Disconnect negative cable -3-
and positive cable -4-
.
Disconnect battery
- 1.1 Disconnect vent hose -2- from the battery.
- 1.2 First disconnect the negative cable -3- , then the positive cable -4- .
- Unclip positive cable -5-
from the line bracket -6-
and set it aside.
Unclipping positive cable
- Lift the battery up and out.
Removing rail and retaining bar
- 3.1 Unscrew screws -3- from the retaining bar -4- and screws -5- on the rail -6- .
- 3.2 Remove rail -6- and retaining bar -4- .