LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera 4S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 85 (21 Exhaust Gas Turbocharging 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 213019 Removing And Installing Turbocharger (V6 MONOTURBO) >> Installing Turbocharger

Installing Turbocharger

WARNING: This page is about a different variant/trim than selected.

Information 

> Removing and installing recirculating air valve 

  1. Install turbocharger.
    1. 1.1 Replace oil return line -1-  and holder.
    G15876791Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Exploded view of oil return on turbocharger

  2. Fit turbocharger.
    1. 2.1 Fit new gaskets on the exhaust flange.
    2. 2.2 Position turbocharger and exhaust pipe -2-  and make sure that the oil return line is fitted correctly.
    3. 2.3 Replace V-band clamp on exhaust pipe -4-  , fit it and tighten to > Tightening torque 20 Nm (14.8 ftlb.)  .
    4. 2.4 Replace fit-studs -1-  for exhaust pipes, fit nuts and tighten to > Tightening torque 15 Nm (11.1 ftlb.)  .
    5. 2.5 Screw on fastening nuts -1-  for exhaust pipes and tighten to > Tightening torque 25 Nm (18.4 ftlb.)  .
    G15876792Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    View of exhaust pipes

  3. Fit catalytic converter.
    1. 3.1 Position catalytic converter, replace seal, fit V-band clamp -4-  and tighten to > Tightening torque 7 Nm (5 ftlb.) +/- 1 Nm (0.5 ftlb.)  .
    G15876793Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Turbocharger overview II

  4. Fit coolant pipes.
    1. 4.1 Replace O-rings on the coolant lines.
    2. 4.2 Insert coolant pipes.
    3. 4.3 Fit fastening screws -1-  and tighten to > Tightening torque 9 Nm (6.6 ftlb.)  .
    G15876794Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Turbocharger overview I

  5. Fit oil supply line.
    1. 5.1 Replace O-ring on oil supply line.
    2. 5.2 Insert oil supply line -3-  .
    3. 5.3 Fit fastening screw -2-  for oil supply line and tighten to > Tightening torque 9 Nm (6.6 ftlb.)  .
    G15876795Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Turbocharger overview II

  6. Fit active carbon filter line.
    1. 6.1 Replace O-ring.
    2. 6.2 Insert active carbon filter line -2-  .
    3. 6.3 Fit fastening screw -1-  and tighten to > Tightening torque 9 Nm (6.6 ftlb.)  .
    G15876796Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Turbocharger at the side

  7. Connect connections.
    1. 7.1 Connect and lock electric plug connection -2-  for recirculating air valve.
    2. 7.2 Connect vacuum hose -4-  to vacuum capsule -3-  .
G15876797Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Turbocharger overview I

scientia non olet · About LEMON Manuals