Assembly Overview Of Front-Axle Final Drive
WARNING: This page is about a different variant/trim than selected.
Front-axle final drive and bracket
| 1 | Screws on bracket > Tightening torque 54 Nm (40 ftlb.) |
| 2 | All-wheel final drive bracket |
| 3 | All-wheel final drive |
| 4 | Screws for all-wheel final drive > Tightening torque 54 Nm (40 ftlb.) |
Tightening sequence for front-axle final drive
Oil drain screw to transfer gear
| 1 | Oil filler screw > Tightening torque 10 Nm (7.5 ftlb.) |
| 2 | Oil drain plug > Tightening torque 10 Nm (7.5 ftlb.) |