LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera 4S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 66 (26 Exhaust System 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 261420 Removing And Installing Heat Shields >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Des... Type Basic val... Toleranc... Toleranc...
Screw for retaining strip with heat protection Item 5 Tightening torque 2.5 Nm (1.8 ftlb.)    
G15880994Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw for retaining strip on rear light
         
Nut on retaining strip with heat protection Item 6 Tightening torque 9 Nm (6.6 ftlb.)    
G15880995Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts for holder with heat protection
         
Speed nut on heat shield   Tightening torque 2.5 Nm (1.75 ftlb.)    
Screw for heat shield   Tightening torque 2.5 Nm (1.75 ftlb.)    
For securing heat shield for rear silencer Speed nut/plastic nut Tightening torque 2.5 Nm (1.75 ftlb.)