Installing Exhaust Manifold
WARNING: This page is about a different variant/trim than selected.
Component overview:
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Component overview of exhaust manifold
| 1 |
Exhaust manifold |
| 2 |
Retaining brackets |
| 3 |
Turbocharger flange seal - replace! |
| 4 |
Metal seal - replace! |
- Fit new metal seal -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Metal seal between exhaust manifold and cylinder head
- Fit exhaust manifold and secure with new nuts.
> Initial tightening 20 Nm (15 ftlb.)
> Final tightening 27 Nm (20 ftlb.)