Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Intake scoop to air-cleaner cowl | Screw-type clamp | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Intake pipe to intake scoop | Screw-type clamp | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Fastening screws securing coolant regulator to distributor housing | M6 x 30 (3 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws for coolant pipes | Tightening torque | 9 Nm (6.5 ftlb.) |