Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screws for coolant distributor housing and coolant pump | M6 x 25 (13 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Coolant pipe mounting | M6 screws (different lengths) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Pulley to coolant pump | Screw, M6 x 10 | Tightening torque | 9 Nm (6.5 ftlb.) |