List Of Materials
WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Upper structural parts
| A | Sheet steel |
| B | High-strength steel |
| C | Very-high-strength steel |
| D | Ultra-high-strength steel |
| E | Aluminium; for details, see |
> 5X00IN05 INFORMATION ON ALUMINIUM REPAIRS
Lower structural parts
| A | Sheet steel |
| B | High-strength steel |
| C | Very-high-strength steel |
| D | Ultra-high-strength steel |
| E | Aluminium; for details, see |
> 5X00IN05 INFORMATION ON ALUMINIUM REPAIRS
| Item | Material group | Use/Characteristics |
|---|---|---|
| A | Sheet steel | Outer skin parts very malleable Can be MIG welded Section replacement as per service information |
| B | High-strength steel | Reinforcement parts moderately to not very malleable Can be MIG welded Section replacement as per service information |
| C | Very-high-strength steel | Reinforcement parts not malleable Can be MIG welded Can be resistance spot-welded only using approved welders Section replacement is not permitted |
| D | Ultra-high-strength steel | Pillars and columns not malleable MIG welding permitted only in exceptional cases Can be resistance spot-welded only using approved welders Section replacement is not permitted |