Removing Transverse Lock Servo Motor

1. Remove protective plate for drive shaft at the left -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Mounting for protective plate for drive shaft at the left

   1. 1.1 Unscrew fastening screws -2-  .
2. Unscrew fastening screws -1-  on servo motor for rear-differential lock -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Mounting for servo motor for rear-differential lock

3. Pull servo motor for rear-differential lock -1-  off the flange on the final drive, tilt it slightly -arrow A-  and release and disconnect electric connector -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric connector on servo motor for rear-differential lock