Vehicle height with steel springs
NOTE:
- The following values relate to the empty weight, i.e. full fuel tank, vehicle with tyre repair kit (or spare wheel, collapsible wheel) and tools, but without driver and without additional weights .
- Tyre pressure in accordance with specifications .
- If the control unit or one of the self-levelling sensors has been replaced, calibration must be carried out using the Porsche System Tester .
| Vehicle height | Steel springs |
|---|---|
| Front-axle height | |
| with 18, 19, 20, 21-inch wheels [mm] | 479, 2 ±10 |
| From outer wheel centre to bottom edge of wing | |
| Rear-axle height | |
| with 18, 19, 20, 21-inch wheels [mm] | 472, 6 ±10 |
| From outer wheel centre to bottom edge of wing | |
| Max. difference in height between left and right: 10 mm | |