| Refrigerant lines to air-conditioning compressor |
|
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Refrigerant line to expansion valve |
M8 x 35 thread |
Tightening torque |
12 Nm (9 ftlb.) |
|
|
| Refrigerant lines to condenser |
M6 x 25 thread |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Refrigerant lines to connection point in front left wheel housing |
M8 x 28 thread |
Tightening torque |
12 Nm (9 ftlb.) |
|
|
| Refrigerant line holder to engine |
M6 thread/section of line from evaporator to compressor |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Refrigerant lines to condenser connection point |
M6 x 25 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Refrigerant line holder to dual clip for refrigerant lines |
Tapping screw |
Tightening torque |
4.5 Nm (3.25 ftlb.) |
|
|
| Refrigerant line holder to lock carrier |
|
Tightening torque |
2.5 Nm (2 ftlb.) |
|
|