Charge air system
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Charge-air cooler
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- Moulded hose
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- Moulded hose
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- O-ring/replace
- Boost pressure sensor (pressure and temperature)
- Screw → Tightening torque: 5 Nm (3.5 ftlb.)
- Rubber sleeve
- Bush
- Nut → Tightening torque: 9 Nm (6.5 ftlb.)
- Rubber sleeve
- Screw-type clamp → Tightening torque: 3 Nm (2 ftlb.)
- Pressure pipe
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- Moulded hose
- Screw-type clamp → Tightening torque: 5.5 Nm (4 ftlb.)
- Screw → Tightening torque: 7 Nm (5 ftlb.)
- Silencer
- Rubber sleeve
- Screw-type clamp → Tightening torque: 3 Nm (2 ftlb.)