LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (17 - Engine - Lubrication 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 174019 Removing And Installing Oil/Water Heat EXCHANGER >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure PDCC expansion hose.
  2. Install front-axle support

    > WM 400819 REMOVING AND INSTALLING FRONT-AXLE SUPPORT (EXCEPT PANAMERA GTS, PANAMERA TURBO S, PANAMERA PLATINUM ED., PANAMERA 4 PLATINUM ED.) - section on "Installing"

    G15198397Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Reinforcement plate

  3. Install front underbody panelling

    > WM 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY (PANAMERA, PANAMERA S, PANAMERA S EXECUTIVE, PANAMERA 4, PANAMERA 4S, PANAMERA 4 S EXECUTIVE, PANAMERA TURBO S) - section on "Installing"

  4. Fill in engine oil

    > 170117 DRAINING AND FILLING ENGINE OIL (CHANGING ENGINE OIL) 

  5. Check the coolant level and top up if necessary.