Removing Oil Pressure Control Valve

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect cable plug and loosen screws on the oil pressure control valve flange.
Loosen retaining clip -1- .

Release connector -2- and pull it off.

Set connector and cable aside and secure if necessary.

Unscrew and remove screws -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cable plug and screws for oil pressure control valve
Pull out sealing flange -1- (-Arrows- ).

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling out sealing flange
Unscrew cap screw on the oil pressure control valve using > 9753 - socket-wrench insert .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Using socket-wrench insert
Grip oil pressure control valve with a > 9235 - relay puller and turn carefully to remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing/fitting oil pressure control valve