LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (53 - Body Rear - (95B) - MACAN S) >> WM 534855 Replacing Rear Side Member (Section) >> Preliminary Work >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

WARNING: This page is about a different car, the 2017 Porsche Macan, 2016 Porsche Macan, and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Accessories In The Repair Area.
    1. 1.1. Remove Add-On Parts In The Repair Area According To The Extent Of Damage On The Vehicle.
  2. Set Up Straightening Bench With Straightening System.
  3. Set Vehicle On Straightening Bench.
  4. Cover The Add-On Parts Adjacent To The Repair Area On The Vehicle.
    1. 4.1. Cover All Accessories Remaining On The Vehicle And Adjacent Areas With Fire-Proof Protective Covers.
  5. Reshape Connection Area Of The Sheetmetal Parts To Be Replaced.
  6. Expose Joint Areas.
    1. 6.1. Remove Underbody Protection, Paint, Etc. From The Joint Areas Of The Body Using A Hot-Air Gun Or Rotary Brush.
  1. Remove Rear Boot Floor Plate. → 532455 Replacing Rear Boot Floor Plate 
  2. Remove Frame For Light.
scientia non olet · About LEMON Manuals