LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 763 (53 - Body Rear - (95B) - MACAN S) >> WM 532555 Replacing Rear-End Well >> Preliminary Work >> Preliminary Work For Body Repairs (Without Straightening System)

Preliminary Work For Body Repairs (Without Straightening System)

WARNING: This page is about a different car, the 2017 Porsche Macan, 2016 Porsche Macan, and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage on the vehicle.
  2. Cover accessories adjacent to the repair area on the vehicle.
    1. 2.1. Cover all accessories remaining on the vehicle and adjacent areas with fire-proof protective covers.
  3. Reshape connection area of the sheetmetal parts to be replaced.
    NOTE: Information on aluminum repairs → WM 5X00IN WELDING ALUMINUM
  4. Expose joint areas.
    1. 4.1. Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals