Charge-air cooler, boost pressure lines and intake air lines
WARNING: This page is about a different car, the 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| 1 | Pressure pipe |
| 2 | Pressure hose (charge-air cooler/pressure pipe) |
| 3 | Charge-air cooler |
| 4 | Intake pipe |
| 5 | Pressure pipe (turbocharger/charge-air cooler) |
| 6 | Ambient air control line |
| 7 | Vacuum line |
| 8 | Wastegate |
| 9 | Pressure hose for tank vent valve |
| 10 | Throttle valve air box (pressure pipe/throttle valve)/always replace following removal |
| 11 | Ambient air connection with O-ring, 26 x 2.5 |
| 12 | Screw, 6 x 35 → Tightening torque: 3 Nm (2 ft lb.) |
| 13 | Screw → Tightening torque: 4 Nm (3 ft lb.) |
| 14 | Screw, M6 x 35 → Tightening torque: 7 Nm (5 ft lb.) |
| # | Screw-type clamps → Tightening torque: 5.5 Nm (4 ft lb.) |