Pinpoint Test B: Diagnostic Module Tank Leakage Tests
WARNING: This page is about a different car, the 2018 Land Rover Discovery and 2017 Land Rover Discovery. However, it is still accessible from the selected car via links, so may be relevant.
- B1: DIAGNOSTIC MODULE TANK LEAKAGE TEST 1
- Using the Jaguar Land Rover Approved Diagnostic Equipment, perform routine - Evaporative System Diagnostic Check - and use the combustible gas detector to check for leaks
Was a leak detected around the fuel filler cap?
- B2: DIAGNOSTIC MODULE TANK LEAKAGE TEST 2
- Tighten the fuel filler cap securely (until 3 clicks are heard)
- Using the Jaguar Land Rover Approved Diagnostic Equipment, perform routine - Evaporative System Diagnostic Check - and use the combustible gas detector to check for leaks
Test passed?
- Yes: Repair complete. Advise the customer to always tighten the fuel filler cap securely (until 3 clicks are heard)
- No: GO to B3.
- B3: DIAGNOSTIC MODULE TANK LEAKAGE TEST 3
- Consider the previous test results
Was a leak detected by the routine?
- Yes: GO to B4.
- No: Diagnostic module tank leakage system circuit fault. Check DTCs and refer to the relevant DTC Index. Repair the circuit fault as necessary. GO to Pinpoint Test E .
- B4: DIAGNOSTIC MODULE TANK LEAKAGE TEST 4
- Consider the previous test results
Was the source of the leak identified?
- Yes: Repair as necessary. GO to Pinpoint Test E .
- No: GO to Pinpoint Test C .