LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (68 - Interior Equipment -- 911 CARRERA (991)) >> WM 684719 Removing And Installing Wind Deflector (CABRIO Models) >> Installing Wind Deflector

Installing Wind Deflector

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Fastening screw for mounting plate. Tightening Torque 5.7 Nm (4.5 ft. lbs.) +/-0.5 Nm (+/-0.3 ft. lbs.) 
  3. Fastening screw for cover for roll-over protection system. Tightening Torque 3 Nm (2 ft. lbs.) +/-0.2 Nm (+/- 0.1 ft. lbs.) 
scientia non olet · About LEMON Manuals