Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut for convertible-top compartment lid hinge | Tightening torque | 23 Nm (17 ftlb.) | |||
| Fastening screw for convertible-top compartment lid hinge | Tightening torque | 23 Nm (17 ftlb.) | |||
|
Loosening hinge |
|||||
| Gap dimension from side panel to convertible-top compartment lid (A) | Perfectly aligned | Gap dimension | 3.9 mm | +1 mm | -0.7 mm |
| Gap dimension from side panel/spoiler to convertible-top compartment lid (B) | Perfectly aligned | Gap dimension | 4.5 mm | +/-0.8 mm | |
|
Gap dimensions |
|||||