Disassembling Convertible-Top Compartment Lid

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove foam part.
1. 1.1. Unclip the foam part -1- at the middle and pull it off sideways in the bonding area.
  
  Fig 1: Identifying Foam Part Of Convertible-Top Compartment Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check the foam part for damage and replace it if necessary.
Remove adhesive residue and clean with cleaning solution.

Fig 2: Cleaning Bonding Area
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew adjusting element at the left and right from the convertible-top compartment lid.

Fig 3: Removing Convertible-Top Compartment Lid Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws on upper part of lid lock.

Fig 4: Identifying Screws On Upper Part Of Lid Lock
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove plugs.
1. 6.1. Check plugs for damage and replace if necessary.