LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 614519 Removing And Installing Rubber Seal With Rail (Lower Side) (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Lower Side Retaining Strip

Removing Lower Side Retaining Strip

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Lower Lateral Seal
G09994550Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

A washer is fitted under the upper fastening point.

  1. Remove lower side retaining strip.
    1. 1.1. Unscrew fastening screws -3-  .
      Fig 2: Identifying Screws On Side Retaining Strip
      G09994551Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 1.2. Remove retaining strip -2-  .