LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 309 (61 - Convertible Top, Hardtop -- 911 CARRERA (991)) >> WM 612819 Removing And Installing Convertible Top Covering (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure wire harness for convertible top in the rear window area. → 975519 REMOVING AND INSTALLING WIRE HARNESS FOR CONVERTIBLE TOP .
  2. Install front retaining strip → 614519 REMOVING AND INSTALLING RUBBER SEAL WITH RAIL (FRONT) .
  3. Install lower side retaining strip → 614519 REMOVING AND INSTALLING RUBBER SEAL WITH RAIL (LOWER SIDE) .
  4. Install rear seal. → 612319 REMOVING AND INSTALLING REAR SEAL .
  5. Install seal for convertible-top tip. → 613919 REMOVING AND INSTALLING SEAL FOR CONVERTIBLE-TOP TIP .
  6. Install lower lateral seal. → INSTALLING LOWER LATERAL SEAL .
  7. Install side convertible top rooflining. → INSTALLING SIDE CONVERTIBLE TOP ROOFLINING .
scientia non olet · About LEMON Manuals