Ignition, Engine Sensors
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Components:
- Hall sender
- Screw, M6 x 16 → Tightening torque: 10 Nm (7.5 ftlb.)
- Engine compartment temperature sensor with rubber sleeve
- Screw, M8 x 35 → Tightening torque: 23 Nm (17 ftlb.)+/-2 Nm (+/-1.5 ftlb.)
- Knock sensor - mark installation position
- Ignition coil
- Screw, M6 x 16 → Tightening torque: 10 Nm (7.5 ftlb.)
- Spark plug → Tightening torque: 32 Nm (24 ftlb.)+/-2 Nm (+/-1.5 ftlb.) → Tightening torque: 25 Nm (19 ftlb.)+3 Nm (+2 ftlb.)
- Oil-pressure sender
- Screw, M6 x 20 → Tightening torque: 10 Nm (7.5 ftlb.)
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Pulse sender (speed sender) to transmission | Screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ftlb.) |