LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (63 - Bumpers -- 911 CARRERA (991)) >> WM 635519 Removing And Installing Rear Apron (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. After fitting the rear apron, check that the heat protection panels are seated correctly, and adjust them if necessary. → 635019 REMOVING AND INSTALLING REAR BUMPER  - section on "Checking and adjusting"
  2. Install tail light. → 943119 REMOVING AND INSTALLING TAIL LIGHT - section on "Installing"
  3. Check rear gap dimensions and make adjustments if necessary.
  4. Retract the spoiler manually.
scientia non olet · About LEMON Manuals