Subsequent Work
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install brake disc.
→ 465319 REMOVING AND INSTALLING REAR BRAKE DISC .
Information
- New parking-brake shoes and new brake discs must be grinded down.
- Grinding down applies only to grey cast-iron brakes with one-piece brake discs.
- There is no need to grind down grey cast-iron brakes on 911 Turbo (991) and 911 GT3 (991) vehicles because compound brake discs with aluminum brake disc hubs are installed.
- PCCB brake discs/parking-brake shoes do not need to be grinded down.
- It is not necessary to grind down the parking-brake shoes if the parking-brake shoes are not replaced . Set the brake shoes to the basic setting if necessary and calibrate the brakes → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .
- Adjust and calibrate the parking-brake shoes. → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .
Grind down the parking-brake shoes during adjustment and calibration if necessary.
- Fit wheel.
→ Installing Wheel .