Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake calliper to wheel carrier, front and rear axle | M10/always use new nuts on front and rear axle following removal. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Brake disc to wheel hub | M6 screw | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Wheel driver pin to wheel hub (central bolt on 911 Turbo/GTS) | Cheese head bolts, M6 x 30/always use new bolts following removal | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Wheel driver pin to wheel hub (central bolt on 911 GT3) | Cheese head bolts, M8 x 32/always use new screws following removal | Tightening torque | 31 Nm (23 ftlb.) |