Identification of required electric plug connection
NOTE:
- The correct individual line is identified based on the relevant connector housing.
- The correct individual lines and the correct tool for loosening the primary and secondary locks on the connector are displayed for every connector housing.
- The following options are available for identifying the connector housing in the online shop → WM 9X00IN ORDERING AND REPAIRING ELECTRIC PLUG CONNECTIONS
- Perform a search in the search field using the part number shown on the connector
.IMPORTANT: Enter the part number without spaces or punctuation
- Perform a search based on the number and arrangement of the pins and comparison with coloured photos
- Perform a search based on the position of the connector in the vehicle and comparison with coloured photos
- Identify the part number using wiring diagrams → "Wiring Diagrams" in PIWIS Tester II 9818 and perform a search in the search field based on the part number that is read out.
- Perform a search in the search field using the part number shown on the connector
.
- The correct crimp connectors are identified based on the colour coding of the line diameters in the online shop. The colour coding corresponds to the colour of the crimp connector.