Removing Inner Side Section

Fig 1: Inner Side Section Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of inner side section

Information:  Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner side section

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner side section

2. Grind down welded seams in area -A  -.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner side section

3. Heat the bonding surfaces.
   1. 3.1. Remove inner side section.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner side section