LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan S >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - (95B) MACAN >> WM 536855 Replacing (Inner) Rear Wheel Housing >> Preparing (Inner) Rear Wheel Housing For Installation >> Notes

Preparing (Inner) Rear Wheel Housing For Installation: Notes

  1. Prepare (inner) rear wheel housing for bonding and welding.
    G11983326Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing (inner) rear wheel housing

  2. Prepare seat belt bracket for bonding and welding.
    1. 2.1. Drill holes for plug-welding in the marked areas A  - using a drill bit with a diameter of Diameter: 8.0 mm  .
    G11983327Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing seat belt bracket

    Green Resistance spot-welding + bonding
    Blue Bonding
    Red Plug-welding/apply a full weld using inert gas without bonding
    Orange Resistance spot-welding
scientia non olet · About LEMON Manuals