Removing Inner Rear Closing Panel

Fig 1: Inner Rear Closing Panel Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of inner rear closing panel

Information:  Drill out the connection point on one side only. Do not damage the plate underneath.

1. Drill out spotwelds using spotweld drill  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner rear closing panel

2. Heat the marked bonding surfaces.
   1. 2.1. Remove inner rear closing panel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing inner rear closing panel