Removing Cowl Panel Cover

Fig 1: Cowl Panel Cover Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of cowl panel cover 

1. Unclip cover -1-  for plenum panel by pulling it upwards and remove it by pulling it forward.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Plenum panel cover 

2. Remove cowl panel cover.
   1. 2.1. Remove wiper arm. Refer to 922519 REMOVING AND INSTALLING WIPER ARM .
   2. 2.2. Unclip cover -1 -  from the windscreen guide and remove it by pulling it upwards.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing cowl panel cover