Preparing Connection Areas Of The Body For Installation

Align the sealing surface and connections of the body.
De-burr connection points and prepare them for welding.
Information:
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive .
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed .
- Do not begin bonding work until all materials and tools necessary for later repair work are available .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing connection areas of the body

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing connection areas of the body

Red	Plug-welding/apply a full weld using inert gas without bonding
Orange	Blind riveting + bonding