Model Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drill bit | Diameter | 6.5 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Drill bit | Diameter | 8.0 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Applying adhesive | Application depth | 3.0 mm | |||
| Applying adhesive | Application depth | 3.0 mm | |||
| Applying adhesive | Application depth | 3.0 mm |