Installing Front Camera

NOTE:

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work .
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation .
Do not touch electric pins and plug contacts .

NOTE: Do not touch the front camera lens!

Connect electric plug connection -1- on the front camera -2- (-a- ) until it engages securely.

Connecting electric plug connection
Install front camera.
1. 2.1. Position front camera -1- on the holder in such a way that the two retaining pins at the left -a- and the retaining pin at the right -b- make contact with the mounting points.
2. 2.2. Press front camera forward into the mounting points until the locks -2- engage securely.
  
  Installing front camera