Disconnecting optical waveguide (PCM to loudspeaker booster and TV tuner)
NOTE:
Observe the general information on optical waveguides. → General information on optical waveguides - MOST bus
NOTE:
Before routing a new optical waveguide:
- Visually check the locks, connector housing and contacts for damage .
- Replace damaged parts if necessary .
- Release electric plug connection -1-
for optical waveguide at the compact connector -2-
for the PCM display and operator control unit -B-
and disconnect it.
Disconnecting electric plug connection from compact connector for PCM
- Release electric plug connection -1-
for optical waveguide at the compact connector -2-
for the TV tuner and disconnect it -B-
.
Disconnecting electric plug connection from compact connector for TV tuner