LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 Leveling System, Air Suspension, Damper Control -- (95B) MACAN >> WM 431619 Removing And Installing PASM Control Unit (Except MACAN Sport Edition) >> Removing and installing PASM control unit >> Removing PASM control unit

Removing PASM control unit

NOTE: Voltage peaks
  • Risk of damage to load or to the control unit 

→ Remove the ignition key and switch off load before disconnecting or removing load.

Installation position: → 4301IN POSITION OF AIR SUSPENSION COMPONENTS 

  1. Release connector -1-  and disconnect it -arrows-  .
  2. Unscrew nuts -2-  .
  3. Remove PASM control unit -3-  from the holder.
    G11984486

    Mounting for PASM control unit 

scientia non olet · About LEMON Manuals